1Note these connect details. You will enter them into the Garmin golf app in a following step.

Host: ipaddress Port: port

2 Open the Garmin golf app on your phone, and make sure the R10 shows as connected under "Garmin Devices".

3Click "TruGolf E6 Connect" (you don't need E6 or any other software).

4Enter the connect details from above. Then click "Test Connection" and make sure the connection is working.

5Head to the Night Range and hit some shots to make sure the connection is working.

Trouble-shooting

Once you''ve completed these steps successfully, the R10 should be flashing green.

If instead it's flashing blue:

1. Turn the R10 off (long press for 3 seconds)
2. Shut down the Garmin app (e.g. on Android, do an orderly exit from Garmin golf app, deleting session if prompted, then swipe it closed).
3. Restart the Garmin golf app
4. Power on the R10 (short press)

Springbok's connector is Windows-based and supports many golf launch monitors, with more under development. Its main site includes a howto guide and support forum.

1Note these connect details. You will enter them into the Springbok connector in a following step.

Host: ipaddress Port: port

2 Open the connector and go into the Settings (gear icon).

3 At the top of the settings window, paste the IP and port from above.

4 Click Save, then close the connector and reopen it.

5 Hit Connect. The connector should connect to the foogolf server, and turn the button green.

6 In the connector's log window, you can confirm the connection.

7Head to the Night Range and hit some shots to make sure the connection is working.

• The original SkyTrak connector is Windows-based, and works only with SkyTrak Version 1 - not with "Plus".
• This connector will only work with a valid SkyTrak Game Improvement subscription.
• The 64 bit version of the Skytrak application must be installed for the connector to work.
• The best place to get support is on the SGT SimulatorGolfTour discord server where there is a special SkyTrak channel.

1Note these connect details. You will enter them into the connector in a following step.

Host: ipaddress Port: port

1 Download the connector from https://app.box.com/s/tzejgqlenomxxfbpvof47htc359287f8 and then follow the instructions to install.

Caution! FooGolf does not provide the connector. Install at your own risk.

2 Complete the following:

1. Run GSCloudGolf.exe
2. Start the SkyTrak connector with the big footer button
3. At the top of the settings window, paste the IP and port from above.

3 You can test the conection even without a SkyTrak. Just start the connector and generate some random test shots with the [?] button.

4Head to the Night Range and hit some shots to make sure the connection is working.

You can connect any launch monitor to FooGolf that connects to the GSPro Open API.

1Note these connect details. You will enter them into the connector in a following step.

Host: ipaddress Port: port

2 Enter the IP address and port number from above into your launch monitor/connector's settings.

3Head to the Night Range and hit some shots to make sure the connection is working.